036-21323-002-C-0206
4 Unitary Products Group
OUTDOOR UNIT
Every unit includes 2 heavy-duty scroll compressors, 2 out-
door fan motors with inherent protection, subfusing and a
copper tube/aluminum fin coil.
All controls are located in the front of the unit in the control
box and are readily accessible for maintenance, adjustment
and service. All wiring (power and control) can be made
through the front of the unit.
ACCESSORIES (FACTORY & FIELD
INSTALLED
• Factory installed Non-Fused Disconnect for safety and
convenience.
• Factory installed Technicoat Condenser Coil
s for corro-
sion protection.
• Field Installed VFD (Variable Frequency Drive
) for Low
Ambient operation down to 0°F.
• Field Installed Hot Gas Bypass for low load operation.
• Field installed Pump-Out Kit for applications where liquid
slugging could be an issue.
FIGURE 2 - INDOOR PRODUCT NOMENCLATURE
YORK INDOOR PRODUCT NOMENCLATURE
H A
120 C 0 0 A 2 A A A 1 A
Model # Model Number Description Options
H Product Category H = Air Conditioner Split System E = Heat Pump Split System
A Product Identifier
A = R-22 Standard Efficiency 2-Pipe
B = R-22 Standard Efficiency 4-Pipe
120
Nominal Cooling
Capacity
MBH
090 = 7-1/2 Ton
120 =10 Ton
150 = 12-1/2 Ton
180 = 15 Ton
240 = 20 Ton
300 = 25 Ton *
360 = 30 Ton *
480 = 40 Ton *
600 = 50 Ton *
C Heat Type C = Cooling Only
00
Nominal Heating
Capacity
00 = No Heat Installed
A Airflow Options A = Standard Motor
2Voltage
2 = 208/230-3-600
4 = 460-3-60
5 = 575-3-60
A Installation Options
A = None
B = Disconnect
AA Additional Options
AA = None
AC = Technicoat Coil
1 Product Generation
1 = 1
st
Generation 2 = 2
nd
Generation
A Product Style A = Style A B = Style B
*NOT AVAILABLE IN HEAT PUMP
To Next Page
Loading...
Need help?
General
