Zebra 105SL User Guide Addendum

31
Operations
Power
09/03/2008 Addendum to the SEH PS105-Z & PS102-Z User Guide P1004197-001
for Zebra Printers
Power
Power for the SEH PS105-Z is provided via pin 18 of the parallel port (Centronics) connector.
LED’s
SEH IPv6 PS Status Indicator
The Status Indicator LED indicates the operational status of the SEH IPv6 PS.
During normal operation, the LED is solid green. This indicates all the hardware is functioning
properly and SEH IPv6 PS has detected the presence of the network. It does not mean the SEH
IPv6 PS has an IP address or is attached to a printer queue.
SEH IPv6 PS Network Activity Indicator
A Network Activity LED indicates a data packet has been received by the SEH IPv6 PS.
During normal operation, the LED is blinking yellow based on the rate at which it receives
packets. Network activity detected by this LED does not mean the activity is data for the print
server. The activity is any activity on the network seen by the SEH IPv6 PS.
SEH IPv6 PS Link Indicator
The Link Indicator LED indicates a physical connection to the network is available via the
SEH IPv6 PS.
During normal operation, the LED is solid green.

Zebra 105SL Specifications

General

Print technology	Direct thermal
Display	LCD
Product color	Gray
Network ready	Yes
Dimensions (WxDxH)	283 x 495 x 394 mm
Standard interfaces	Parallel, Serial
Internal memory	6 MB
Maximum label width	115 mm
Maximum label length	0.991 m
Power requirements	90-264 VAC, 48-63 Hz

Weight and Dimensions

Depth	495 mm
Width	283 mm
Height	394 mm
Weight	29000 g