Zebra 110Xi4 User Manual

131
Troubleshooting
LCD Error Messages
3/12/09 Xi4 User Guide P1009874-001
LCD Error Messages
The LCD displays messages when there is an error. See Table 12 for LCD errors, the possible
causes, and the recommended solutions.
Table 12 • LCD Error Messages
LCD Display/
Printer Condition
Possible Cause Recommended Solution
The ERROR light flashes.
The printhead was replaced with
one that is not a genuine Zebra™
printhead.
Install a genuine Zebra™ printhead.
The printer stops; the
RIBBON light is on; the
ERROR light flashes.
In thermal transfer mode, ribbon is
not loaded or incorrectly loaded.
Load ribbon correctly. See Load
Ribbon on page 68.
In thermal transfer mode, the
ribbon sensor is not detecting
ribbon.
1. Load ribbon correctly. See Load
Ribbon on page 68.
2. Calibrate the sensors. See
Calibrate Media and Ribbon
Sensor Sensitivity on page 101.
In thermal transfer mode, media is
blocking the ribbon sensor.
1. Load media correctly. See Print
Modes and Printer Options
on page 36.
2. Calibrate the sensors. See
Calibrate Media and Ribbon
Sensor Sensitivity on page 101.
In thermal transfer mode, the
printer did not detect the ribbon
even though it is loaded correctly.
1. Print a sensor profile. See Print
Sensor Profile on page 100. The
ribbon out threshold (
1) is likely
too high, above the black area that
indicates where the ribbon is
detected (
2).
2. Calibrate the sensors or load
printer defaults. See Calibrate
Media and Ribbon Sensor
Sensitivity on page 101 or LOAD
DEFAULTS on page 87.
1
2

Zebra 110Xi4 Specifications

General

Maximum resolution	203 x 203 DPI
Core diameter	76 mm
Ribbon length	300 m
Media thickness	0.076 - 0.305 mm
Maximum media length	3810 mm
Maximum roll diameter	203 mm
Supported paper width	102 mm
Media thickness (imperial)	0.003 - 0.012 \
Maximum media length (imperial)	150 \
Supported paper width (imperial)	4 \
RS-232 ports	1
Standard interfaces	USB 2.0
Connectivity technology	Wired
Weight (imperial)	50 lbs
Dimensions (WxDxH)	261.9 x 517.5 x 393.7 mm
Flash memory	8 MB
Certification	-BSMI, -cTUVus, -CCC, -CE, -C-Tick, -EN55022 Class B, -EN55024, -EN61000-3-2, 3, -FCC Class B, -GOST-R, -ICES-003 Class B, -IEC 60950-1 / EN60950, -KCC, -NOM, -S Mark, -STB, -UkrSEPRO, -VCCI, -ZIK.
Internal memory	16 MB
Built-in barcodes	Code 39, Code 49, Code 93, MaxiCode, PDF417, Postnet, QR Code, UPC-A, UPC-E
Page description languages	XML, ZPL, ZPL II
Storage temperature (T-T)	-40 - 140 °F
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Power requirements	90 - 264 VAC, 48 - 62 Hz

Weight and Dimensions

Weight	22700 g