Zebra 110Xi4 User Manual

161
Specifications
Ribbon Specifications
3/12/09 Xi4 User Guide P1009874-001
Ribbon Specifications
Refer to the following tables for ribbon specifications.
110Xi4
140Xi4, 170Xi4, and 220Xi4
Note • Consider the following when using ribbon:
• Match the ribbon to the label width and printhead width that you are using. The ribbon
should be at least as wide as the labels to protect the printhead from excessive wear.
• Ribbon must be wound with the coated side out.
Ribbon Specifications 110Xi4 200 dpi 110Xi4 300 dpi 110Xi4 600 dpi
Printhead resolution 203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
Ribbon width Minimum 0.79 in. (20 mm) 0.79 in. (20 mm) 0.79 in. (20 mm)
Ribbon width Maximum 4.33 in. (110 mm) 4.33 in. (110 mm) 4.33 in. (110 mm)
Standard length with 2:1 label to
ribbon ratio
984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with 3:1 label to
ribbon ratio
1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside diameter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll outside
diameter
3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)
Ribbon
Specifications
140Xi4 170Xi4 200 dpi 170Xi4 300 dpi 220Xi4 200 dpi 220Xi4 300 dpi
Printhead resolution 203 dots/inch
(8 dots/mm)
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
Ribbon width Minimum 1.57 in. (40 mm) 2.0 in. (51 mm) 2.0 in. (51 mm) 4.25 in. (108 mm) 4.25 in. (108 mm)
Ribbon width Maximum 5.10 in. (130 mm) 6.7 in. (170 mm) 6.7 in. (170 mm) 8.60 in. (220 mm) 8.60 in. (220 mm)
Standard length with 2:1
label to ribbon ratio
984 ft (300 m) 984 ft (300 m) 984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with 3:1
label to ribbon ratio
1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside
diameter
1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll
outside diameter
3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)

Zebra 110Xi4 Specifications

General

Maximum resolution	203 x 203 DPI
Core diameter	76 mm
Ribbon length	300 m
Media thickness	0.076 - 0.305 mm
Maximum media length	3810 mm
Maximum roll diameter	203 mm
Supported paper width	102 mm
Media thickness (imperial)	0.003 - 0.012 \
Maximum media length (imperial)	150 \
Supported paper width (imperial)	4 \
RS-232 ports	1
Standard interfaces	USB 2.0
Connectivity technology	Wired
Weight (imperial)	50 lbs
Dimensions (WxDxH)	261.9 x 517.5 x 393.7 mm
Flash memory	8 MB
Certification	-BSMI, -cTUVus, -CCC, -CE, -C-Tick, -EN55022 Class B, -EN55024, -EN61000-3-2, 3, -FCC Class B, -GOST-R, -ICES-003 Class B, -IEC 60950-1 / EN60950, -KCC, -NOM, -S Mark, -STB, -UkrSEPRO, -VCCI, -ZIK.
Internal memory	16 MB
Built-in barcodes	Code 39, Code 49, Code 93, MaxiCode, PDF417, Postnet, QR Code, UPC-A, UPC-E
Page description languages	XML, ZPL, ZPL II
Storage temperature (T-T)	-40 - 140 °F
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Power requirements	90 - 264 VAC, 48 - 62 Hz

Weight and Dimensions

Weight	22700 g