Accessories
79
Charging the Device in the Vehicle Cradle
Ensure the cradle is connected to a power source.
Insert the device into the cradle. The device starts to charge through the cradle as soon as it is inserted.
This does not deplete the vehicle battery significantly. The battery charges in approximately four hours.
See Table 3 on page 27 for charging indications.
NOTE: The Vehicle Cradle operating temperature is -40°C to +85°C. When in the cradle, the device will
only charge when its temperature is between 0°C to +40°C.
TC7X Vehicle Communication Charging Cradle
The Vehicle Communication Charging Cradle:
• holds the device securely in place
• provides power for operating the device
• re-charges the battery in the device.
The cradle is powered by the USB I/O Hub.
Refer to the TC7X Vehicle Cradle Installation Guide for information on installing the TC7X Vehicle
Communication Charging Cradle.
Figure 47 TC7X Vehicle Communication Charging Cradle
Inserting the Device into the TC7X Vehicle Communication Charging Cradle
To ensure the device was inserted correctly, listen for the audible click that signifies that the device locking
mechanism was enabled and the device was locked into place.