FILLING LIQUID INTO TIRES
A 135
VALVE FOR FILLING OF TIRES WITH
LIQUID
All rear wheel tubes are equipped with
valve enabling filling of tires with liquid
when the adapter is used.
Filling of front tires and rear tires
double assembly with liquid is not
allowed.
A 136
BLOCKING FRONT WHEELS
Don’t forget to block front tires
against movement before lifting
of rear wheels.
PROCESS FOR FILLING WATER INTO
TIRES (picture on the following page)
- Unload tire by lifting tractor and turn it
with valve upwards (A).
- Deflate the tube and remove the valve
insert.
- Thread the adapter for filling of tires
with water and slide the water hose
over adapter.
Fill the tube with prescribed quantity of
liquid. The tank (B) or pressure water( C)
can be used for filling of tire. Remove
the water hose and the adapter for filling
of tire with water.
- Thread the valve insert and inflate the
tire into prescribed inflation pressure
(D).
- Thread the valve dust cap after infla-
tion.
- Fill the second tire by the same way.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz