FRONT WHEEL TOE-IN
A 127
FRONT WHEEL TOE-IN
Front wheel toe-in is measured on the
rim and is 2 to 6 mm at tractor with non -
driven axle.
Front wheel toe-in is 0 to 4 mm at tractor
with front driving axle.
Check and eventually adjust the play of
front wheel bearings before toe-in
checking.
A 128
Front wheel toe-in is measured on rims. The toe-in "S" is calculated as difference of
measured values: S = B - A
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
Need help?
General