ABB 630 series Installation Manual

Section 1 Introduction
1.1 This manual
The installation manual contains instructions on how to install the IED. The
manual provides procedures for mechanical and electrical installation. The chapters
are organized in chronological order in which the IED should be installed.
1.2 Intended audience
This manual addresses the personnel responsible for installing the product hardware.
The installation personnel must have basic knowledge of handling electronic
equipment.
1MRS755958 C Section 1
Introduction
630 series 5
Installation Manual

ABB 630 series Specifications

General

Frequency	50/60 Hz
Protection Functions	Overcurrent, earth fault
Communication Protocols	Modbus
Enclosure	IP20
Type	Protection relay