ABB 630 series Installation Manual

7.4 Sending the IED for repair
In case of product problems, contact the nearest ABB office or representative for
consultation and instructions.
7.5 Exchanging the IED
To exchange the IED with another identical unit, remove the IED and install the
new one. The exchangeable units can be found from the PartsOnLine system, see
www.abb.com/partsonline. Use of PartsOnLine requires user registration.
Check with your local ABB if the IED can be upgraded.
Section 7 1MRS755958 C
Removing, repairing and exchanging
66 630 series
Installation Manual

ABB 630 series Specifications

General

Frequency	50/60 Hz
Protection Functions	Overcurrent, earth fault
Communication Protocols	Modbus
Enclosure	IP20
Type	Protection relay