ABB Ability 800xA Series User Manual

2 Hardware Installation
Additional information regarding this product is available in MyABB portal
(https.//myportal.abb.com/home).
It is required that all applicable revisions and rollups for your system are installed
either previously or at the same time this firmware is installed. Industrial IT System
800xA SV 5.x/6.x System Software Versions (3BSE037782*) lists all the revisions
and rollups released for the above system version and includes links to the revisions
and rollups and associated release notes.
2.1 Restrictions
This is the first launch of FF LD 810HSE Ex. Hence, no restrictions with different articles
apply.
Table 2.1: Hardware Versions
Hardware VersionArticle NumberDevice Type
1.03BSE079522R1LD 810HSE Ex
You can look up the hardware version and the article number of the device on the
type plate.
In contrast to LD 800HSE Ex, the LD 810HSE Ex requires 10 mA from each H1
cannel.
Do not combine different module types in redundant pairs, i.e. do not combine a
Linking Device of type LD 810HSE Ex with other types such as LD 800HSE or
LD 800HSE Ex.
2PAA114135-610 23
2 Hardware Installation
2.1 Restrictions

ABB Ability 800xA Series Specifications

General

System Type	Distributed Control System (DCS)
Architecture	Client-server
Redundancy	Supports redundant controllers, communication networks, and I/O modules
Operating System	Microsoft Windows Server
Communication Protocols	OPC, Modbus, IEC 61850, PROFIBUS, Foundation Fieldbus
Integration	Supports integration with third-party systems and ABB products
Scalability	Highly scalable, from small to large installations
Cybersecurity	Built-in cybersecurity features including access control and network security
User Interface	Graphical user interface
Application Support	Supports a wide range of industrial applications including process control and safety