ABB PST Series User Manual

74 1SFC132003M0201
6HWWLQJVDQGFRQILJXUDWLRQ
&KDSWHU
.LFN6WDUW
Activate the .LFN6WDUW function by entering this menu.
Press 6WRUH to save the selection.
.LFN/HYHO
Set the required level of the Kick Start. Press 6WRUH to save
the data.
This menu will only be visual if Kick Start is activated.
.LFN7LPH
Set the required time for the kick start. Press 6WRUH to save
the data.
This menu will only be visual if Kick Start is activated.
6WDUW5DQJH
The ramp time for start can be set between 1 and 30
seconds as default. If required, the range can be extended
up to 120 seconds by entering this menu. Press 6WRUH to
save the data.
6WRS5DQJH
The ramp time for stop can be set between 0 and 30
seconds as default. If required, the range can be extended
up to 120 seconds by entering this menu. Press 6WRUH to
save the data.
The configuration of the parameters in the Start/Stop
group is now completed. It is possible to return to top level
by pressing Back three times. To configure the protection,
proceed to that menu.

ABB PST Series Specifications

General

Brand	ABB
Model	PST Series
Category	Controller
Language	English