ABB RET615 User Manual

Function IEC 61850 A B C D E F G H
TE01 TE02 TE03 TE04 TE05 TE06 TE07 TE08
Analog value scaling (4 pcs) SCA4GAPC 4 4 4 4 4 4 4 4
Integer value move (4 pcs) MVI4GAPC 1 1 1 1 1 1 1 1
1, 2, ... = Number of included instances. The instances of a protection function represent the number of identical protection function blocks available in the
standard configuration.
() = optional
HV = The function block is to be used on the high-voltage side in the application.
LV = The function block is to be used on the low-voltage side in the application.
1) "Io calculated" is always used.
2) IoB calculated is always used.
3) "IoB measured" is always used.
4) Master trip is included and connected to the corresponding HSO in the configuration only when the BIO0007 module is used. If additionally
the ARC option is selected, ARCSARC is connected in the configuration to the corresponding master trip input.
5) "IoB calculated" and "3IB" are always used.
6) Available only with IEC 61850-9-2
7) Available only with COM0031-0037
2.3 Indications
Table 3: Explanations of the indications table columns
Column name Description
BitA Default 0X and 1X bit address for the data.
RegA Default 3X and 4X register.bit (00-15) address for the data.
IEC 61850
name
Original IED data object identification. Described in the IEC 61850 format as Logical
Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the
same as the application function block name.
SA name
The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information.
Value Meaning of the value states.
2.3.1 Premapped indications
2.3.1.1 Common data 1
Table 4: Common data 1
BitA
RegA IEC 61850 name SA name Description Values
CTRL.LLN0
2720 170.00 .Loc.stVal - Remote/Local state 0/1=Rem/Loc
2721 170.01 .LocKeyHMI.stVal.Statio
n
- Station state 1=Station
DR.RDRE1
2722 170.02 .RcdMade.stVal - DR recording made 1=Made
2723 170.03 .mcd
1MRS756878 H Section 2
Modbus data mappings
RET615 17
Point List Manual

ABB RET615 Specifications

General

Brand	ABB
Model	RET615
Category	Protection Device
Language	English