ABB RET670 User Manual

Section 13 Reset
About this chapter
This chapter describes how to reset the IED and when this is necessary.
13.1 Reset guide for IED
13.1.1 Reset counters
13.1.1.1 Circuit breaker SXCBR
The circuit breaker counter is reset under Reset counter in the HMI tree.
Main menu/Reset/Reset counters/CircuitBreaker(XCBR)/SXCBR:x
In the dialog box that appears, choose YES to reset.
13.1.1.2 Circuit switch SXSWI
The circuit switch counter is reset under Reset counters in the HMI tree.
Main menu/Reset/Reset counters/CircuitSwitch(XSWI)/SXSWI:x
In the dialog box that appears, choose YES to reset.
13.1.1.3 Reset event counter CNTGGIO
The event counter is reset under Reset counters in the HMI tree.
Main menu/Reset/Reset counters/EventCounter(GGIO)/CNTGGIO:x
13.1.1.4 Reset pulse counter PCGGIO
The Pulse counter is reset under Reset counters menu in the HMI tree.
Main menu/Reset/Reset counters/PulseCounter(GGIO)/PCGGIO:x
In the dialog box that appears, choose YES to reset.
13.1.1.5 LDCM clear counters
Main menu/Reset/Reset counters/LDCMCommunication/LDCMX
1MRK504114-UEN E Section 13
Reset
103
Operator's manual

ABB RET670 Specifications

General

Rated Frequency	50/60 Hz
Inputs	Analog and binary inputs
Application	Protection of power systems
Communication Protocols	IEC 61850, DNP3, Modbus
Operating Temperature Range	-25°C to +55°C
Mounting	Rack mounted
Number of Binary Inputs	Up to 48
Number of Binary Outputs	32
Protection Functions	Overcurrent Protection
Outputs	Binary outputs
Enclosure	IP 54
Type	Line Differential Protection