Parameters for current and voltage levels, deadbands, timers and alarm levels are
found here.
9.3.10.6 Automatic voltage control for tapchanger, parallel control TR8ATCC
Main menu/Settings/Setting Group N/Control/
TransformerVoltageControl(ATCC,90)/TR8ATCC:x
Parameters for current and voltage levels, deadbands, timers and alarm levels are
found here.
9.3.11 Monitoring
9.3.11.1 Overview
Event counter settings are found under Monitoring in the Setting Group N menu.
9.3.11.2 Event counter CNTGGIO
Main menu/Setting/Setting group N/Monitoring/EventCounter(GGIO)/
CNTGGIO:x
Here the function can be set on or off.
9.3.12 Logic
9.3.12.1 Overview
Under Logic there are settings for Trip logic, Trip matrix, Logic gate, Logic SR
memory and Logic timer set. Under each of these function categories there are a
number of instances, each with a parameter set.
9.3.12.2 Tripping logic SMPPTRC
Main menu/Settings/Setting group N/Logic/TripLogic(PTRC,94)/SMPPTRC:x
Displays available instances of the trip logic function SMPPTRCwith some settable
parameters per instance. The settable parameters include operation, tripping order,
trip lockout and minimum duration of trip output signal.
9.3.12.3 Trip matrix logic TMAGGIO
Main menu/Settings/Setting group N/Logic/TripMatrix(GGIO)/TMAGGIO:x
Displays available instances of the trip logic function TMAGGIO, each with
settable parameters for operation, selections, delay times, and pulse times.
Section 9 1MRK504114-UEN E
Read and change settings
68
Operator's manual
To Next Page
Loading...
Need help?
General
