ABB RET670 User Manual

Section 5 Understand the HMI tree
About this chapter
This chapter describes the structure of the HMI. The main menu includes
submenus such as Measurements, Events, Disturbance Report, Settings,
Diagnostics, Test and Reset. These branch out into a typical tree structure.
5.1 Overview
The local HMI has the following main menu:
• Control
• Measurements
• Events
• Disturbance records
• Settings
• Diagnostics
• Test
• Reset
• Authorization
• Language
Each main menu item can have several other submenus.
5.1.1 Menu-tree for RET670
Main menu
Sub menu Sub-sub menu
Control Single line diagram
Commands
Measurements Analog primary values
Analog secondary values
Analog mean values
Monitoring
Metering
Events
Disturbance records Manual trig
Settings Time
Table continues on next page
1MRK504114-UEN E Section 5
Understand the HMI tree
29
Operator's manual

ABB RET670 Specifications

General

Rated Frequency	50/60 Hz
Inputs	Analog and binary inputs
Application	Protection of power systems
Communication Protocols	IEC 61850, DNP3, Modbus
Operating Temperature Range	-25°C to +55°C
Mounting	Rack mounted
Number of Binary Inputs	Up to 48
Number of Binary Outputs	32
Protection Functions	Overcurrent Protection
Outputs	Binary outputs
Enclosure	IP 54
Type	Line Differential Protection