ABB RET670 User Manual

9.3.12.4 LogicGate
Main menu/Settings/Setting group N/Logic/LogicGate/GATE:x
Displays parameter settings for Operation (On or Off).
9.3.12.5 LogicRSMemory
Main menu/Settings/Setting group N/Logic/LogicRSMemory/RSMEMORY:x
Displays setting parameters for operating mode of memory function.
9.3.12.6 LogicSRMemory
Main menu/Settings/Setting group N/Logic/LogicSRMemory/SRMEMORY:x
Displays setting parameters for operating mode of memory function.
9.3.12.7 LogicTimerSet
Main menu/Settings/Setting Group N/Logic/LogicTimerSet/TIMERSET:x
Displays settable parameters for Operation (On or Off) and delay for settable timer.
9.4 Activate setting group
Main menu/Settings/Activate setting group
Available setting groups can be configured in PCM600. Under activate setting
group one of these setting groups can be chosen for the application at hand.
9.5 Language
Under the language part of the main menu the language options available in the
HMI are located. These vary depending on the configuration ordered.
1MRK504114-UEN E Section 9
Read and change settings
69
Operator's manual

ABB RET670 Specifications

General

Rated Frequency	50/60 Hz
Inputs	Analog and binary inputs
Application	Protection of power systems
Communication Protocols	IEC 61850, DNP3, Modbus
Operating Temperature Range	-25°C to +55°C
Mounting	Rack mounted
Number of Binary Inputs	Up to 48
Number of Binary Outputs	32
Protection Functions	Overcurrent Protection
Outputs	Binary outputs
Enclosure	IP 54
Type	Line Differential Protection