BayRes blocks the output values are all boolean and indicate the status of processes
and devices.
Reservation input RESIN
Main menu/Test/Function status/Control/Apparatus control/ReservationInput/
RESINx:y
Displays available instances of the function RESIN with six measurements per
instance. Apart from the exchange measurement (EXCH_OUT), the measurement
outputs are all boolean and provide information about acknowledgements from
other bays, reservation requests form other bays (RE_RQ_B) and also validity
checks regarding requests (V_RE_RQ).
Bay control QCBAY
Main menu/Test/Function status/Control/ApparatusControl/BayControl/
QCBAY:x
Displays available instances of the function QCBAY with three measurements per
instance. The operator place allocation (PSTO) measurement has an integer as
output data, whereas the Update of position is blocked (UPD_BLKD) and Function
is blocked for commands (CMD_BLKD) have boolean output data.
11.6.10.2 Commands
In the commands menu it is possible to view three sets of values. These are found
under the submenus menucascade/uicontrol.
Automation bits, command function for DNP3.0 AutomationBits
Main menu/Test/Function status/Control/Commands/Automation Bits/
AUTOBITS:x
Displays the output data of the AutomationBits function.
IEC60870-5-103
Main menu/Test/Function Status/Control/Commands/IEC60870-5-103
Under this part of the HMI tree there are the following three submenus:
• IED Commands
• Function Commands
• User Defined Commands
Various IED, function and user defined command data can be viewed here.
Single command SINGLECMD
Main menu/Test/Function status/Control/Commands/SingleCommand/
SINGLECMD:x
1MRK504114-UEN E Section 11
Test the IED
91
Operator's manual
To Next Page
Loading...
Need help?
General
