Operation Manual / TPL73-B.. - 85-B11/ -B12
3 Commissioning / 3.1 Oil supply
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
3 Commissioning
3.1 Oil supply
A carefully designed and installed oil supply, which functions in all pos-
sible operational conditions, is an important prerequisite for trouble-
free turbocharger operation.
The turbocharger is normally lubricated with oil from the engine oil cir-
cuit.
NOTICE
With regard to the oil supply, please observe the engine builder's spe-
cifications for lubricating oil selection, oil change intervals, oil filtration,
oil pressure and oil temperature.
Oil filtration
A lubricating oil filter with a mesh size of ≤ 0.050 mm is adequate for
TPL ..-B turbochargers.
Page 28 / 151
To Next Page
Loading...
Need help?
General
