AERMEC HMI-BHP User Manual

25
8 MAIN MENU
8.1 NAVIGATING THE MENU
1 2
3 4
General (1/2)
Temp. unit: Celsius
On/O memory: On
Beeper: O
Back light: Lighter
Time&Date: Enter
This menu is used to set the machine adjustment values.
The following keys are used to navigate this menu:
1. Move back to the previous page;
2. Move on to the next page;
3. Go back to the higher level menu;
4. Go back to the main page (Home).
To access a function, click on the text of that function.
 NOTE: while navigating the menu pages, the current page of the selected menu will
be displayed in the header (i.e. in the darker upper area).
8.2 SETTING THE UNIT OF MEASUREMENT (TEMP. UNIT)
General (1/2)
Temp. unit: Celsius
On/O memory: On
Beeper: O
Back light: Lighter
Time&Date: Enter
Click on the "Temp. unit" label to change the unit of measurement used for temper-
ature (Celsius or Fahrenheit).
8.3 ACTIVATING/DEACTIVATING THE MEMORY (ON/OFF
MEMORY)
General (1/2)
Temp. unit: Celsius
On/O memory: On
Beeper: O
Back light: Lighter
Time&Date: Enter
Click on the "On/o memory" label to activate or deactivate the saving of parame-
ter/function settings.
 NOTE: if this option is activated, after a power failure the unit will automatically
resume the values set and saved in the memory.
8.4 ACTIVATING/DEACTIVATING THE SOUND (BEEPER)
General (1/2)
Temp. unit: Celsius
On/O memory: On
Beeper: O
Back light: Lighter
Time&Date: Enter
Click on the "Beeper" label to activate or deactivate the acoustic signal that identi-
es each touch on the screen.
8.5 SETTING THE DISPLAY LIGHTING (BACK LIGHT)
General (1/2)
Temp. unit: Celsius
On/O memory: On
Beeper: O
Back light: Lighter
Time&Date: Enter
Click on the "Back light" label to dene whether to use the "Lighted" logic (display
always active) or "Energy save" logic (display switched o after 5 minutes of inactiv-
ity; press on the display to automatically switch it back on).
8.6 SETTING THE SYSTEM DATE AND TIME (TIME&DATE)
28
29
30
27
26
05
06
07
04
03
2018
2019
2020
2017
2016
15 00
16 01
17 02
14 59
13 58
2018-05-28 15:00
Time&Date
After accessing the "Time&Date" function, you can set the current date and time to
be used on the system. Lastly, press the top right button to save the data entered.

AERMEC HMI-BHP Specifications

General

Brand	AERMEC
Model	HMI-BHP
Category	Controller
Language	English