AG Duo Operation Manual
AR / 25.07.23 / Version 1 12
Always replace all guards after making any adjustments to the AG Duo. Replace any missing
or damaged guards immediately.
Never approach the AG Duo whilst the machine is being operated.
Keep hands and feet away from moving parts, i.e. conveyor belt, auger, top agitator, brush
or scraper (if fitted). Do not reach into the bin due to the danger of entanglement with the
auger and agitator.
If manually loading the bin, follow manual handling recommendations. Refer to HSE
guidelines:
https://www.hse.gov.uk/toolbox/manual.htm
Bedding products require the use of Personal Protective Equipment (PPE) such as gloves,
goggles, face masks and overalls. Please contact your bedding supplier for their
recommendations.
1.2.11 WHEN SERVICING AND ADJUSTING THE AG DUO
The AG Duo must only be serviced/maintained by a competent person who understands the
workings of the machine and the risks involved in carrying out this type of work.
Ensure the AG Duo is on the ground or, if in an elevated position, that it is securely
supported.
Wear appropriate PPE (Personal Protective Equipment) when carrying out all maintenance
or service work.
Isolate the AG Duo (see Section 1.2.5) and apply the parking brake (see Section 1.2.6) before
performing any maintenance or service work.
All defects which could affect the safe operation of the AG Duo must be rectified
immediately.
If running the machine during maintenance or adjustment, keep a safe distance away from
moving parts. Always stop the machine before making any further adjustments and replace
all guards once your work is complete.
To Next Page
Loading...
Need help?
General
