To Next Page

To Previous Page

AG Duo Operation Manual

AR / 25.07.23 / Version 1 23

4.3 ADJUSTMENTS

The discharge rate is governed by:

1. The size of the metering shutter opening.

2. The speed of the auger and agitator.

3. The speed of the conveyor.

The spread pattern is governed by:

1. The forward speed of the AG Duo

2. The speed of the conveyor.

3. The amount of product falling onto the conveyor belt (metering shutter opening and

auger & agitator speed).

4.3.1 METERING SHUTTER

The metering shutter should be adjusted to provide a suitable opening at the bottom of the

hopper to obtain the desired bedding flow rate. The size of the opening will determine the

rate of flow that the bedding product flows onto the conveyor belt and will depend on the

bedding product and your needs. The ideal opening will be found through trials.

Moving the adjusting lever to the right will reduce the opening size, thus reducing product

flow.

Moving the adjusting lever to the left will increase the opening size, thus increasing product

flow.

Metering Shutter

Adjusting Lever

Shutter Opening

Shutter Closing

Questions and Answers:

Need help?

Do you have a question about the AG Duo and is the answer not in the manual?

AG Duo Specifications

General