To Next Page

To Previous Page

AG Duo Operation Manual

AR / 25.07.23 / Version 1 41

5.5 AGITATOR AND AUGER CHAIN ADJUSTMENT

The AG Duo has an agitator and auger fitted as standard. The auger, below the

agitator, is designed to increase the flow rate to the conveyor. The agitator is

driven by the auger below it and helps prevent material bridging inside the

hopper.

The auger is driven via chain and sprocket from the agitator motor and

gearbox, which is fixed to the chassis towards the front of the AG Duo. +36 V

from the electrical enclosure powers the agitator motor.

The Agitator Chain is located behind the side cover panel.

Auger Chain

Agitator Chain

Side Cover Panel

Chain Adjusting

Plate

Questions and Answers:

Need help?

Do you have a question about the AG Duo and is the answer not in the manual?

AG Duo Specifications

General