What to do if no product is being dispensed from my AG Duo?
If no product is being dispensed from your AG Farm Equipment, it could be due to a blockage. Check for and remove any blockage. Alternatively, the auger or conveyor might have stopped due to an overload. Reset the auger or conveyor. If the problem persists, reduce the auger or conveyor speed.
Why is too much bedding being dispensed from my AG Duo Farm Equipment?
If too much bedding is being dispensed from your AG Farm Equipment, it could be because the gap in the metering shutter is too big. Close the metering shutter to suit the bedding in use. Another reason might be that the auger or conveyor is running too fast. Reduce the auger or conveyor speed.
General| Brand | AG |
|---|---|
| Model | Duo |
| Category | Farm Equipment |
| Language | English |
Thanks for purchase and manual introduction.
General safety instructions, principles, and warnings.
Emphasizes user cooperation and caution for accident prevention.
Defines the AG Duo's primary function for brushing and dispensing.
Details prohibited actions and the risks associated with incorrect usage.
Explanation of safety symbols found on the machine and their meanings.
Procedure for electrically isolating the machine for safe maintenance.
Instructions on using the parking brake to secure the machine.
How to operate and restart the machine using the emergency stop.
Safety guidelines for transporting and lifting the AG Duo.
Essential pre-operation checks and safety requirements.
Safety advice and operational procedures during machine use.
Safety precautions for maintenance, servicing, and adjustments.
Specific safety precautions for handling the machine's battery.
Guidelines for safe cleaning and storage procedures.
Details the brush mechanism, its floating arm, and power source.
Explains the driven axle's function and power source.
Information on locating and using the QR code for manual access.
Description of the optional hopper cover and its purpose.
Details the optional scraper blade and its self-adjusting capabilities.
Provides physical dimensions of the AG Duo machine.
Lists key technical parameters like weight, capacity, and battery details.
Details measured noise levels and recommendations for minimizing effects.
Information on locating the machine's model and serial number.
Instructions for charging the AG Duo's battery before operation.
Overview of the controls on the handlebar panel.
How to adjust settings for discharge rate and spread pattern.
Procedure for adjusting the metering shutter to control product flow.
How to adjust conveyor and auger/agitator speeds.
Instructions for adjusting the sweeping brush height.
How to adjust the brush angle for effective cubicle cleaning.
Troubleshooting common issues and recovery procedures.
Procedure for resetting overloaded machine mechanisms.
Steps for safely removing blockages from the machine.
How to locate and reset the circuit breaker.
How to restart the machine after activating the emergency stop.
Recommended maintenance intervals and tasks.
Specific battery care instructions for machine storage.
Location of all greasing points for machine lubrication.
How to align and adjust the conveyor belt tension.
Procedure for adjusting the conveyor drive belt.
How to tension the agitator and auger chains.
Instructions for adjusting the scraper blade for wear.
Steps for safely removing and replacing the brush.
Procedure for removing and replacing the conveyor belt.
Instructions for replacing conveyor rollers.
How to replace the conveyor side skirts.
Procedure for removing and replacing the scraper blade.
Steps for removing and replacing the skid block.
Instructions for safely replacing the machine's battery.
Lists and illustrates parts for the agitator, auger, and chain drive.
Lists and illustrates parts for the shutter mechanism.
Lists and illustrates parts for the conveyor system.
Lists and illustrates parts for the brush and its arm assembly.
Lists and illustrates parts for the wheels and axles.
Lists and illustrates parts for the brush actuator.
Lists and illustrates parts related to machine covers and panels.
Lists and illustrates parts for the optional scraper attachment.
Details electrical system components and wiring diagrams.
General description of the battery charger's technology and features.
Steps for inspecting the charger package contents.
Lists specifications and parameters for different charger models.
Step-by-step guide on how to use the battery charger.
Important safety and handling precautions for the battery charger.
Maintenance procedures for the battery charger.
General terms and conditions of business for sales.
Guidelines for ensuring quality in translated instruction manuals.
Dealer's responsibility for end-user training and manual provision.
Procedure for warranty registration and claim submission.
To Next Page