Agilent Technologies G1330B User Manual

17
Theory of Operation
Electrical Connections
Electrical Connections
WARNING Never use cables other than the ones supplied by Agilent Technologies
to ensure proper functionality and compliance with safety or EMC
regulations.
Figure 5 Elctrical Connections
• The GPIB connector is used to connect the thermostatted autosampler
with a computer. The address and control switch module next to the GPIB
connector determines the GPIB address of your thermostatted
autosampler. The switches are preset to a default address (see
Autosampler Reference Manual) and this is recognized immediately after
power on.
GPIB
RS232C
CAN-bus
Remote
Vial number output
Relay contacts
CAN cable to previous module
CAN cable to next module
Therm-ALS cable
Thermostat - Autosampler
cable

Agilent Technologies G1330B Specifications

General

Brand	Agilent Technologies
Model	G1330B
Category	Thermostat
Language	English