ALLEN & HEATH CQ Series User Manual

 55
User Guide V1.1.0 Issue 1
To Playback Multitrack from an SD Card
1.
Go to CONFIG / Digital Audio (Symbols) /
USB/SD to set up the connection.
2.
Select the Sample Rate. This should match the
Sample Rate of recording.
3.
On the CQ, go to CONFIG / INPUTS and select
the channels to use for playback. Use Multi
Select to select multiple inputs at the same time.
Recorded audio will play back to the channel it
was recorded from.
4.
Switch Input Source to USB/SD (Symbols).
5.
Go to HOME / RECORD / Multitrack
6.
To select a stored multitrack file from the SD
Card, touch the Select Track drop-down menu at
the left bottom corner of the screen.
7.
If a recording cannot be seen, try a different
sample rate (steps 1 and 2).
8.
Use Playback Mode to select whether some, all
or none of the recordings will be repeated.
9.
Use the Transport bar to control playback.

ALLEN & HEATH CQ Series Specifications

General

Brand	ALLEN & HEATH
Model	CQ Series
Category	Recording Equipment
Language	English