Rockwell Automation Publication 1756-UM001M-EN-P - February 2012 133
I/O Modules Chapter 8
2. Select the I/O module you want to add and click OK.
3. Specify the configuration properties according to the module and network
configuration you are using.
For more information about the module configuration properties, see the
user manual for the I/O module you are adding.
For this type of module See this user manual
Analog I/O ControlLogix Analog I/O Modules User Manual,
publication 1756-UM009
Configurable flowmeter ControlLogix Configurable Flowmeter Module User
Manual, publication 1756-UM010
Digital I/O ControlLogix Digital I/O Modules User Manual, publication
1756-UM058
HART analog I/O ControlLogix HART Analog I/O Modules User Manual,
publication 1756-UM533
High speed analog I/O ControlLogix High Speed Analog I/O Module User Manual,
publication 1756-UM005
High speed counter ControlLogix High Speed Counter Module User Manual,
publication 1756-UM007
Programmable limit switch ControlLogix Programmable Limit Switch Module User
Manual, publication 1756-UM002
To Next Page
Loading...
Need help?
General
