24 Rockwell Automation Publication 1756-UM001M-EN-P - February 2012
Chapter 1 Install the 1756-L7x Controller
3. Press and release the SD card to eject it.
4. Remove the SD card and close the door.
Install the SD Card
Complete these steps to install the SD card in the 1756-L7x controllers.
1. Verify that the SD card is locked or unlocked according to your preference.
For more information about the lock/unlock memory settings in
RSLogix 5000™ software, see the Load or Store to the Memory Card
section on page 66
.
2. Open the door for the SD card.
3. Insert the SD card into the SD card slot.
To Next Page
Loading...
Need help?
General
