Rockwell Automation Publication 1756-UM001M-EN-P - February 2012 61
Start Using the Controller Chapter 3
Use the Controller Status Menu to Download
After you have set a communication path in the RSLogix 5000 project, you can
use the Controller Status menu to download to the controller. To download, from
the Controller Status menu, choose Download.
Download via the Controller Status Menu
Upload from the Controller
Uploading a project to the controller copies the project from the controller to
RSLogix 5000 software. To upload a project, use one of these methods:
• Use the Who Active Dialog Box to Upload
, page 61
• Use the Controller Status Menu to Upload
, page 62
Use the Who Active Dialog Box to Upload
You can use the features of the Who Active dialog box to upload from your
controller after you have set the communication path. Complete these steps to
upload from the controller.
1. After setting the communication path, click Upload in the Who Active
dialog box.
After the download completes on a 1756-L7x controller, the project name is
indicated on the scrolling status display.
To Next Page
Loading...
Need help?
General
