18 Rockwell Automation Publication 6000-UM002E-EN-P - April 2018
Chapter 1 Introduction
Standards Compliance
Technical specifications and relevant standards in the manufacture, testing, and
acceptance of equipment include:
Standard Number Standard Description
UL 347A Medium Voltage Power Conversion Equipment Preliminary Standard
CSA C22.2 No. 274-13 Adjustable Speed Drives
ANSI Instrument Transformers C57.13
NEC National Electric Code
OSHA Occupational Safety & Health Act
IEC 60034-17 Rotating Electrical Machines Part 17, Cage Induction Motors When Fed from Converters
IEC 60146 Semiconductor Converters General Requirements
IEC 60204-11 Safety of machinery Electrical Equipment of machines-Part 11: requirements of HV equipment
for voltages above 1000V AC or 1500V DC and not exceeding 36 kV
IEC 60529 Degrees of Protection provided by enclosures
IEC 61800-3 Adjustable speed electric power drive systems - Part 3 EMC requirements and specific test
methods
IEC 61800-4 Adjustable speed electric power drive systems - Part 4 Rating specification for AC power drive
systems above 1000V AC and not exceeding 35 kV
IEC 61800-5-1 Adjustable speed electric power drive systems - Part 5-1: Safety requirements - Electrical,
thermal and energy
IEC 60076 Electric Power Transformer
IEC 60038:1983 IEC Standard Voltages
IEEC C57.18.10-1998 IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers
IEEC C57.12.01-1998 IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers
IEEE C57.12.91-1995 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE 519-1992 IEEE Practices and Requirements for Harmonic Control in Electrical Power Systems
To Next Page
Loading...
Need help?
General
