Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017 49
Chapter 3
Configuring the Drive in a Logix System
This chapter provides instructions on how to configure an Allen-Bradley®
ControlLogix® controller to communicate with a connected PowerFlex® 755T
drive. The minimum RSLogix 5000® or Studio 5000® software version that can
work with the PowerFlex 755T drives is version 20.
Topic Page
Establish Communication 48
Uploading the Electronic Data Sheet (EDS) File 50
Obtain Add-on Profiles 51
Create Logix Controller Project 51
Example Network 51
Adding the Bridge to the I/O Configuration 52
Add the Drive to the Project 54
Configure Input and Output Data 57
Download the Configuration to the Controller 60
Correlate the Drive with the Controller 62
Updating the AOPs and Database Files 63
Configuration to Aid in Field-Failure Replacement 65
Using an Ethernet Switch with DHCP/BOOTP Server 66
Using Firmware Supervisor 67
Using Automatic Device Configuration (ADC) 69
Configure a PowerFlex 755T Drive for ADC 71
ADC and Logix Memory 74
Peripheral Changes When Using ADC 74
Special Considerations For 20-750-S1 Safe Speed Module (S1) 75
Testing ADC 77
Monitoring ADC Progress 77
Programmatically Monitoring Connection Status and the ADC Configuration
Signature
80
Best Practices 82
To Next Page
Loading...
Need help?
General
