52 Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017
Chapter 3 Configuring the Drive in a Logix System
10. Keep running RSLinx software and verify that the computer connects
with the drive.
a. From the Communication menu, choose RSWho.
b. In the menu tree, click the ‘+’ next to the Ethernet driver.
If the ‘EtherNet/IP Driver’ cannot see your drive, as an alternative, use
either the ‘Ethernet devices’ or the ‘Remote Devices via Linx Gateway’
RSLinx driver.
Uploading the Electronic
Data Sheet (EDS) File
PowerFlex 755T Series drives have built-in EDS files for RSLinx software to
upload and register.
1. Right-click the EtherNet/IP drive that is shown as a yellow question
mark or ‘Unrecognized Device’ in the RSWho dialog box.
2. Choose ‘Upload EDS file from device’ as shown in the following
example.
By uploading the EDS file, it also uploads the icon files for the device.
The question mark changes to a drive icon.
To Next Page
Loading...
Need help?
General
