These instructions include:
–
Safety regulations
–
Operating instructions
–
Maintenance instructions
These instructions have been prepared for operation on the
construction site and for the maintenance engineer.
These instructions are intended to simplify operation of the ma-
chine and to avoid malfunctions through improper operation.
Observing the maintenance instructions will increase the reliabili-
ty and service life of the machine when used on the construction
site and reduce repair costs and downtimes.
Always keep these instructions at the place of use of the ma-
chine.
Only operate the machine as instructed and follow these in-
structions.
Observe the safety regulations as well as the guidelines of
the civil engineering trade association „Safety rules for the
operation of road rollers and compactors“ and the pertinent
regulations for the prevention of accidents.
Also observe the corresponding rules and regulations valid
in your country.
Ammann Verdichtung GmbH is not liable for the function of the
machine when used in an improper manner and for other than the
intended purpose.
Operating errors, improper maintenance and the use of incorrect
operating materials are not covered by the warranty.
The above information does not extend the warranty and liability
conditions of business of Ammann Verdichtung GmbH.
We reserve us the right to take changings due to technical deve-
lopment without announcement.
Please enter
(data on machine type plate)
Mach.-type: ______________________________
Mach.-No.:_______________________________
Engine-type: _____________________________
Engine-No.: ______________________________
MOTORENFABRIK HATZ KG
D-94099 RUHSTORF
GmbH
+CO
TYP KENNZ.
MOTOR/FABRIK. NO. ABE/AUSF.
MIN
1
NH PV Cm³
MADE IN GERMANY
Foreword
Ammann Verdichtung GmbH
Josef-Dietzgen-Straße 36 • D-53773 Hennef
Tel.: +49 2242 8802-0 • FAX: +49 2242 8802-59
e-mail: ammann.hennef@ammann-group.com
www.ammann-group.com
To Next Page
Loading...
Need help?
General
