5.2 Maintenance schedule (HATZ = À / Honda = )
Intervals
Daily 20 h 50 h 100 h 200 h 250 h 400 h
If neces-
sary
Works
Clean machine
À
Check engine oil level
1)
À
Change engine oil
1)
À
3)
À
Check the water trap
1)
À
Clean engine oil filter
1)
À
3)
À
Clean fuel filter
1)
Change fuel filter
1)
À
Check air filter
1)
À
Change air filter element
2)
À
(À)
Check valve clearance
1)
À
3)
À
Exciter: Check oil level
À
Exciter: Change oil
2)
À
3)
À
Check hydraulic oil level
À
Change hydraulic oil
À
Check the hydraulic hose lines
2)
À
Check rubber buffers
À
Check V-belt
À
Check screwed connections for tight
-
ness
À
3)
À
1)
See engine operating manual
2)
Minimum once a year
3)
For the first time
5. Maintenance
5.1 General notes
Careful maintenance:
ð increased service life
ð increased function
ð reduced downtimes
ð increased reliability
ð reduced repair costs
–
Observe the safety regulations!
–
Maintenance works should only be carried out when the
engine is shut off.
–
The engine and machine should be cleaned thorougly be-
fore carrying out maintenance work.
–
Park the machine on a flat surface and secure it against
rolling away and slipping.
–
Ensure that operating materials and replaced parts are
disposed of safely and in an environmentally - friendly
way.
–
Before commencing work on any electrical equipment,
disconnect the battery and cover it with insulating mate-
rials.
–
Do not confuse «PLUS» and «MINUS» poles on the bat
-
tery.
–
It is essential that short-circuits be prevented in cables
carrying current.
–
Burn-out lightbulbs in indicator lamps should be re
-
placed immediately.
–
When cleaning the machine with a high-pressure water
jet, do not spray the electrical components directly.
–
After washing the components, blow-dry them with com-
pressed air in order to prevent surface leakage current
and corrosion.
–
When carrying out welding work on the engine or ma-
chine,earth the welding instrument as close as possible
to the welding point and disconnect the battery.
35
To Next Page
Loading...
Need help?
General
