Chapter 3: Configuration Options
NVR Copy Settings
The section of the NVR Controls page shown in Figure 13 is displayed when you click the NVR Copy link. Options are described in
Tabl e 8
.
FIG. 13
NVR Copy Settings
MPEG Settings
The section of the NVR Controls page shown in Figure 14 is displayed when you click the MPEG link. Options are described in
Tabl e 9
.
FIG. 14
MPEG Settings
TABLE 8 NVR Controls Page: NVR Copy Settings
Option Description Notes
Destination NVR
drop-down
Choose to copy a recording from the NVR selected at
the top of the NVR Controls page to the NVR selected
as the Destination NVR.
Recording drop-down Choose which recording you wish to copy.
Copy button Click to begin copying the recording.
TABLE 9 NVR Controls Page: MPEG Settings
Option Description Notes
Recording drop-down Select a recording to convert to an MPEG file.
Bitrate drop-down Leave the bitrate at the recommended setting or adjust
as needed.
The higher the bitrate, the higher the quality (and the
larger the file) of the conversion.
Convert button Click to begin the conversion.
MPEG List Completed conversions are listed here.
Stop converting button Click to end the conversion.
Delete button Click to delete the MPEG file selected in the MPEG List.
Download mpeg button Select a conversion from the list and then click this
button to download the file.
To Next Page
Loading...
Need help?
General
