Ansul AUTOPULSE Z-20 User Manual

2 Overview
The AUTOPULSE Z-20 Agent Releasing Panel provides audible and visible indication of alarms, troubles, and supervisory conditions.
The AUTOPULSE Z-20 Agent Releasing Panel supports non-addressable or conventional notification devices and addressable initiating
devices*. The panel is configured with a panel programmer.
*From this point on, the AUTOPULSE Z-20 agent releasing panel is referred to as AUTOPULSE Z-20.
AUTOPULSE Z-20 operator instructions are described in the AUTOPULSE Z-20 Agent Releasing Panel Operator’s Manual 579-1165AR.
AUTOPULSE Z-20 programming instructions are described in the AUTOPULSE Z-20 Agent Releasing Panel Programmer’s manual 579-1167AR.
2.1 Z-20 Product List
Table 1: Product list
PID Part number Base panel
445577 4007-9101AR AUTOPULSE Z-20, red
Table 2: Product list and manual
PID Part number Optional modules: Field
installed
Manual
445579 4007-9801 Zone/Relay Module 579-1103
445584 4007-9802 25 V Regulator Module 579-812
445581 4007-9803 IDNet+ Loop Expansion Module 579-1106
445582 4007-9805 LED Module 579-1105
445583 4007-9806 SDACT Module 579-954
4007-9809 Relay Module 579-955
page 4 579-1102AR Rev C
Z-20 Agent Releasing Panel Installation Manual

Ansul AUTOPULSE Z-20 Specifications

General

Brand	Ansul
Model	AUTOPULSE Z-20
Category	Security System
Language	English