18
use and maintenance SR 50
WARNING
Position Function
Key
removal
Neither the en-
gine, nor the
lights can be
switched on.
The engine can
be started, the
turn indicators,
the horn, the
mixer oil warn-
ing light, the re-
serve fuel
warning light,
the tempera-
ture indicator
(only if engine
is hot) and the
fuel gauge are
enabled.
It is possible
to remove the
key.
It is possible
to remove the
key.
It is not
possible to
remove the
key.
Steering
lock
1
The steering is
locked. It is
neither
possible to
start the
engine, nor to
switch on the
lights.
IGNITION SWITCH
The ignition switch is positioned on the right
side, near the steering column.
NOTE The key (1) operates the igni-tion/
steering lock switch, the battery/tool kit com-
partment lock and the saddle lock.
Two keys are supplied together with the ve-
hicle (one spare key).
NOTE Do not keep the spare key on the
vehicle.
STEERING LOCK
Never turn the key to position “ ” in run-
ning conditions, in order to avoid losing
control of the vehicle.
OPERATION
To lock the steering:
◆ Turn the handlebar completely leftwards.
◆ Turn the key (1) to position “
” and
press it.
◆ Release the key.
NOTE Turn the key and steer the handle-
bar at the same time.
◆ Rotate the key (1) anticlockwise (left-
wards), steer the handlebar slowly until
the key (1) reaches position “
”.
◆ Extract the key.
To Next Page
Loading...
Need help?
General
