77
use and maintenance
SR 50
WARNING
WARNING
LUBRICANT CHART
Transmission oil (recommended): F.C., SAE 75W - 90 or GEAR SYNTH, SAE 75W - 90.
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the A.P.I.
GL-4 specifications.
Mixer oil (recommended): GREEN HIT 2 or CITY 2T.
As an alternative to the recommended oil, use high-quality oils with characteristics in compliance with or superior to the ISO-L-ETC++, A.P.I.
TC++ specifications.
Fork oil (recommended):
F.A. 5W or F.A. 20W fork oil;
an alternative FORK 5W or FORK 20W fork oil.
If you need an oil with intermediate characteristics in comparison with the
F.A. 5W and F.A. 20W or FORK 5W and FORK
20W, these can be mixed as indicated below:
SAE 10W =
F.A. 5W 67% of the volume + F.A. 20W 33% of the volume, or
FORK 5W 67% of the volume + FORK 20W 33% of the volume;
SAE 15W = F.A. 5W 33% of the volume + F.A. 20W 67% of the volume, or
FORK 5W 33% of the volume + FORK 20W 67% of the volume.
Bearings and other lubrication points (recommended): AUTOGREASE MP or GREASE 30.
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C.... +140°C,
dripping point 150°C... 230°C, high protection against corrosion, good resistance to water and oxidation.
Protection of the battery poles: neutral grease or vaseline.
Use new brake fluid only.
Brake fluid (recommended):
F.F., DOT 5 (DOT 4 compatible) or BRAKE 5.1, DOT 5 (DOT 4 compatible).
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.
Engine coolant (recommended): ECOBLU - 40°C or COOL.
To Next Page
Loading...
Need help?
General
