39
use and maintenance
SR 50
Risk of fire.
Keep fuel and other flammable sub-
stances away from the electrical compo-
nents.
Before beginning any maintenance opera-
tion or any inspection of the vehicle, stop
the engine, extract the key from the igni-
tion block, wait until the engine and the
exhaust system have cooled down and if
possible lift the vehicle by means of the
proper equipment, on firm and flat
ground.
Before proceeding, make sure that the
room in which you are working is prop-
erly ventilated.
Keep away from the red-hot parts of the
engine and of the exhaust system, in or-
der to avoid burns.
Do not hold mechanical pieces or other
parts of the vehicle with your mouth: the
components are not edible and some of
them are noxious or even toxic.
If not expressly indicated otherwise, for
the reassembly of the units repeat the dis-
assembly operations in reverse order.
In case any maintenance operation has
to be carried out, it is advisable to use
latex gloves.
Normally, the routine maintenance opera-
tions can be performed by the user; how-
ever, in some cases the use of specific tools
and technical expertise may be required.
If you need assistance or technical advice,
consult your aprilia Official Dealer, who can
ensure you prompt and accurate servicing.
Ask your aprilia Official Dealer to test the
vehicle on the road after a repair or periodic
maintenance operation.
In any case, personally carry out the “Pre-
liminary checking operations” after any main-
tenance operation, see p. 31 (PRELIMINARY
CHECKING OPERATIONS).
WARNINGWARNING
MAINTENANCE
CAUTION
To Next Page
Loading...
Need help?
General
