20
use and maintenance SR 50
BATTERY / TOOL
KIT COMPARTMENT
This compartment is positioned in the lower
part of the vehicle, between the footrests.
To reach it, proceed as follows:
◆ Insert the key (1) in the lock.
◆ Rotate the key (1) clockwise, pull it and
remove the cover (2).
The tool kit (3) includes:
- 1 tool case;
- 1 21 mm spark plug socket spanner;
-
1 16-mm tubular ignition spanner;
- 1 socket spanner rod;
- 1 double-ended, cross-/cut headed-
screwdriver type PH size 2;
- 1 screwdriver handle;
- 1 4 mm hexagon spanner.
BAG HOOK
Do not hang excessively bulky bags or
parcels to the hook, as this may seriously
compromise the manoeuvrability of the
vehicle or the movement of your feet.
The bag hook (4) is positioned on the front
part of the inner shield.
Max. allowed weight: 1.5 kg.
WARNING
REAR
MUDGUARD EXTENSION
The rear mudguard extension (5) is provided
as standard equipment and can be installed
if the vehicle is used on wet roads, since it
reduces the reach of the water spray caused
by the rear wheel.
NOTE The rear mudguard extension (5),
complete with screws and relevant nuts, is
supplied as standard equipment and is
housed in the crash helmet/glove
compartment.
For the installation, see p. 53 (INSTALLING
THE REAR MUDGUARD EXTENSION).
5
1
2
3
4
To Next Page
Loading...
Need help?
General
