ASUS M2N-VM DH 2-31
2.5.3 APM Configuration
Select Menu
Item Specic Help
Select system power state
when AC Power returns.
APM Conguration
Restore on AC Power Loss [Power-Off]
PWR Button < 4 secs [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Power On By External Modems [Disabled]
Power On by RTC Alarm [Disabled]
x Date (of Month) Alarm 0
x Alarm Time (hh:mm) 0 :0 : 0
Power up By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Restore on AC Power Loss [Power-Off]
Allows you to set the Restore on AC Power Loss function.
Conguration options: [Power-Off] [Power-On] [Last State]
HDD Down In Suspend [Disabled]
Conguration options: [Disabled] [Enabled]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more
than 4 seconds. Conguration options: [Suspend] [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE
devices & NV Onboard LAN. Conguration options: [Disabled] [Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Conguration options: [Disabled] [Enabled]
2.5.2 ACPI APIC Support
The Advanced Conguration and Power Interface (ACPI) support in the
Application-Specic Integrated Circuit (ASIC) is enabled. This item is not
user congurable.