2-40 Chapter 2: BIOS setup
1. Insert the storage device that contains the “xxx.CMO” BIOS prole.
2. Turn on the system.
3. Enter BIOS setup program. Go to
Tools then select Load from File
and press <Enter>.
4. Press <Tab> to select the drive with the BIOS prole then press
<Enter>to load le.
5. Follow message screen when loading is nished.
Update only a BIOS le coming from the same memory/CPU
conguration and BIOS version.
Select Menu
Item Specic Help
Load BIOS Prole from
Prole 1.
Load BIOS Prole
Load from Prole 1
Load from Prole 2
Load from File
Phoenix-Award BIOS CMOS Setup Utility
Tools
Select Menu
Item Specic Help
Save current BIOS Prole
to Prole 1.
Save BIOS Prole
Save to Prole 1
Save to Prole 2
Save to File
Phoenix-Award BIOS CMOS Setup Utility
Tools
Save BIOS Profile
Save to Profile 1/2
Allows you to save the current BIOS le to the BIOS Flash. Press <Enter> to
save the le.
Save to File
Allows you to save the current BIOS le to the hard disk, a oppy, or USB
ash disk with a FAT32/16/12 format.
To save the BIOS le:
1. Insert the storage device with at least xxMB of available storage
space.
2. Turn on the system.
3. Enter the BIOS setup program. Go to
Tool then select Save to File and
press <Enter>.