EasyManua.ls Logo

Asus P5QL-E - Motherboard - ATX User Manual

Asus P5QL-E - Motherboard - ATX
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
ASUS P5QL-E 4-29
4.5.5 PCIPnP
The PCIPnP menu items allow you to change the advanced settings for PCI/PnP
devices.
Take caution when changing the settings of the PCIPnP menu items. Incorrect
eld values can cause the system to malfunction.
Plug And Play O/S [No]
When set to [No], BIOS congures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
congures the Plug and Play devices not required for boot.
Conguration options: [No] [Yes]
Legacy USB Support [Auto]
Allows you to enable or disable the support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled. Conguration options: [Disabled] [Enabled] [Auto]
USB Mass Storage Device Conguration
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S [No]
NO: lets the BIOS
congure all the
devices in the system.
YES: lets the
operating system
congure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
BIOS SETUP UTILITY
Advanced
USB Mass Storage Device Conguration
USB Mass Storage Reset Delay [20 Sec]
Device #1 Kingston DataTraveler
Emulation Type [Auto]
BIOS SETUP UTILITY
Advanced
USB Mass Storage Reset Delay [20 Sec]
Conguration options: [10 Sec] [20 Sec] [30Sec] [40 Sec]
Emulation Type [Auto]
Conguration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM]

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Asus P5QL-E - Motherboard - ATX and is the answer not in the manual?

Asus P5QL-E - Motherboard - ATX Specifications

General IconGeneral
Form FactorATX
ChipsetIntel P43
CPU SocketLGA 775
Maximum Memory16 GB
Memory TypeDDR2
Memory Speed1066/800/667 MHz
Memory Slots4 x DIMM
Storage Interfaces6 x SATA 3Gb/s, 1 x IDE
Compatible ProcessorsIntel Core 2 Quad, Core 2 Duo, Pentium, Celeron
Expansion Slots3 x PCI
USB Ports12 x USB 2.0
LANRealtek RTL8111C Gigabit LAN
Audio8-channel High Definition Audio
RAID SupportRAID 0, RAID 1, RAID 0+1, RAID 5

Summary

Safety Information

Electrical Safety

Precautions to prevent electrical shock hazards during system handling and relocation.

Operation Safety

Guidelines for safe installation and operation of the motherboard and its components.

P5QL-E Specifications Summary

Chapter 1: Product Introduction

Chapter 2: Hardware Information

Central Processing Unit (CPU)

Covers CPU socket information, compatibility, and installation procedures.

Chapter 3: Powering Up

Starting Up for the First Time

Guides users through the initial system startup process and POST checks.

Chapter 4: BIOS Setup

Managing and Updating your BIOS

Covers utilities and methods for managing and updating the motherboard's BIOS.

BIOS Setup Program

Introduces the BIOS setup utility and how to navigate its menus and options.

Ai Tweaker Menu

Provides options for overclocking-related settings, including CPU and memory tuning.

Advanced Menu

Allows configuration of advanced system settings for CPU, chipset, and onboard devices.

Chapter 5: Software Support

RAID Configurations

Explains how to configure IDE and Serial ATA drives using Intel ICH10R RAID controller.

Creating a RAID Driver Disk

Guides users on creating a floppy or USB disk with RAID drivers for OS installation.

Related product manuals