EN 20
USING THE STEAM MODE
Steam Mode Setting
1
Fill the water tank up to the maximum
line and place it back. Then place your
food into the cooking cavity.
2
Turn the Mode Selector to Steam
mode position. Turn the Multi function
Selector to set the steam level high,
mid or low.
3
If desired, adjust the cook time,
delayed start time or the temperature
(if available). See page 15.
4
Press Next/Start. The combi steam
oven will start.
If there is too little water while cooking, you will see a symbol in
the display along with a beep being played.
Add water into the tank and wait 5 seconds to continue with
the steaming.
•
You can add water into the tank at any time while cooking.
Note
1) During cooking, cook time and temperature can be changed.
2) In Steam mode settings, the top and bottom steam heating elements switch o and on
throughout cooking to regulate the temperature.
To Next Page
Loading...
Need help?
General
