More Options
In order to access the rest of the functions, press the MORE soft-
key while the main screen is visible.
A list of nine additional func-
tions will appear similar to
the picture on the left. In
order to access any of the
functions on the list, press
the number on the keypad
that is associated with the
desired function from the list.
Pressing ‘1’ will allow the user to edit any given parameter.
Pressing ‘2’ will allow the user to select a new parameter.
Parameters can be selected from the menu or electrically through
the I/O port on the side of the unit. A dip-switch setting governs
which selection method is in use (front panel selection/electrical
I/O selection).
Pressing ‘3’ will allow the user to globalize a parameter set.
During globalization, the data from one parameter is selected and
copied into all of the other parameter sets.
Pressing ‘4’ allows access to the I/O options.
Pressing ‘5’ allows access to the time and date functions.
Pressing ‘6’ allows the user to reset the total, the batch, or both
the total and the batch.
Pressing ‘7’ allows the user to view past statuses.
Pressing ‘8’ will allow a user to program a new password into the
unit.
11 RE Qualifier System Manual
To Next Page
Loading...
Need help?
General
