Appendix B – Power
asafeinstall_dgb, AutroSafe Interactive Fire Detection System, Release 4,
116-P-ASAFE-INSTALL/DGB, Doc-1004796-2, 2021-08-23, Autronica Fire and Security AS
Page 76
16. Appendix B – Power
16.1 Power Unit BPS-410
Note:
The BPS-410 Power Unit 24VDC/10A is delivered as two separate part
numbers:
• 116-BPS-410 for 230VAC
• 116-BPS-410/115 for 115VAC
The Power Unit BPS-410 contains the following:
• 24V/10A power supply
• Power Board BSF-400, including:
o AutroFieldBus interface
o 115VAC or 230VAC input
o 6 outputs 24VDC (max. 2A each)
o 1 fault relay output
For detailed information, refer to this chapter (Power Supply) and
datasheet.
16.2 Power Board BSF-400