14
Wall Mount Installation
1. Attach the Drilling Paper to the wall and mark the two screw holes on the wall. Screw the support
screws to the wall. Leave some space between the wall and screws for hanging the camera on the
wall later.
[Note] Please prepare two screws (not included in the package) for hanging the camera on the
wall. Use anchors if necessary.
For Concrete wall: M5 x20mm self-tapping screws (x2) + Plastic conical anchor
For Wooden wall: M5 x20mm self-tapping screws (x2)
2. Use the supplied 2 Tripod Screws to secure the supplied Wall Mount Kit to the bottom panel of the
camera.
To Next Page
Loading...
Need help?
General
