HOW TO ACCESS BLOWER
Unplug the game from the wall and remove the back door and
remove all the red balls from cabinet.
Remove the 2 of 1 5/8” black bugle screws (A5SCFH050) on the
wood piece that shows “Blower Access” using a # 2 square bit.
This wood can now be removed from the cabinet.
The blower can now be seen and inspected.
To remove the blower continue below.
HOW TO REMOVE BLOWER
To remove the blower from the cabinet, first follow the above
directions.
Then, remove the 2 of 1 5/8” black bugle screws
(A5SCFH050) using a # 2 square bit.
Remove white wood shelf from cabinet.
The ball chute on the side of the cabinet will need to be removed next:
On the bottom of the ball chute, remove the 4 of black 10’s
(A5SCPH150) using a # 2 square bit.
On the top of the ball chute, remove the 2 of 3/4 “ bugle screws
(A5SCSQ001) using a Phillips screwdriver.
The ball chute can now be removed from the cabinet.
To Next Page
Loading...
Need help?
General
