Game keys are taped to the Drop Button of the game.
Unlock the back door and remove from cabinet.
QUIK DROP SETUP
The game will arrive on 2 pallets. Please inspect the pallets for shipping damage and report
immediately to the freight company if any damage is found.
There will be about 1/2 hour of assembly time needed.
Tools Needed:
1 step ladder (6 foot) 9/16” Wrench 2 people
Phillips screwdriver bit # 2 Square head screwdriver bit
Important:
Portions of this game are heavy, bulky and large. Assembly requires 2 people to lift heavy
components, and ladders that are tall and strong enough to position components to the top of the
game.
From the large pallet, unwrap and unbox the lower cabinet.
Position the lower cabinet in position about 3 feet away from the wall.
To prevent damage to the carousel motor during shipping, bubble wrap
has been installed in the back of the game.
The bubble wrap must be removed before turning on game!
Unlock the coin box door and remove hardware kit which is located
in the coin box.
The marquee is heavy, bulky and large.
Assembly requires 2 people and ladders
that are tall and strong enough to position
components to the top of the game.
Carefully lift marquee to the top of the
game and position the tube into the white
plastic ring mounted to the roof of the
game.
To Next Page
Loading...
Need help?
General
