HOW TO CHANGE LIGHTS IN MARQUEE
The marquee will have to removed from the game to change the LED lights inside.
Unplug the game from the wall, use a ladder to carefully unlock the upper back
door of the marquee.
Locate the 4 cables that emerge from the hole in the far
wall above the speaker. These 4 cables will have to
unplugged from the bottom of the cabinet and fed up
through this hole.
Unplug CE5841 from Splitter Board
Unplug CE5842 from CE5859
Unplug CE5851 from CE5822
Unplug CE5830 from CE5858
Release the 2 latches on the right side of the marquee
and swing open the large round marquee.
Using 2 people to help support the marque - remove
the screws in the hinge and bring the marquee to the floor.
Lay the marquee on it’s face and remove the black screws
around the outside edge.
The cables can now be inspected or replaced.
HOW TO CHANGE FUSES IN MARQUEE
Unplug the game from the wall, use a ladder to carefully unlock the
upper back door of the marquee.
Locate the AACE5858 cable. The 5 amp
fuses are located inside the black plastic
housings. Fuses are part # A5FUSE11
To Next Page
Loading...
Need help?
General
