BEKA PICO Series User Manual

© BEKA 201 !6 All rights reserved
BAL2185_PICO_with_PICOtroniX1_PICOtronic_0816_EN
Signals
LED green
LED red
ON
OFF
1 sec.
1 sec.
OFF
ON
LED red
1 sec.
1 sec.
OFF
ON
LED green
ON
OFF
1 sec.
1 sec.1 sec.
Function
Error
Operating mode
Lubrication
pulse-dependent
Error
line rupture monitoring
LED green
LED red
ON
OFF
OFF
ON
1 sec.
1 sec.
1 sec.
1 sec.
Error
Operating mode
Cycle
pulse-dependent
LED red
LED green
Ready for service: 1,5 sec.
ON
OFF
OFF
ON
Display „ready for service“
after first activation
LED red
LED green
OFF
ON
During entire lubrication
ON
OFF
Lubrication sequence
LED green
LED red
ON
OFF
1 sec.
1 sec.
OFF
ON
Cycle blocked
(This code is not shown at the
installed signal lamps in the
driver‘s cabin.)
12.3 Signals of the integrated control unit PICO-tronic
The pump´s functions are indicated via two control LEDs (green/red) in the display on the pump´s motor casing, where
thered LEDalways indicates anerror in theprogram sequence.
The functions of the LED can also be displayed in the driver‘s cabin via installed signal lamps. They have to be ordered
separately.
Ifthere arevarious error atthe same time,they areindicatedwith aninterruption of 2sec.

BEKA PICO Series Specifications

General

Brand	BEKA
Model	PICO Series
Category	Water Pump
Language	English